The VentCore Open Source Ventilator Project

By on April 13th, 2020 in Design

Tags: , , , , , ,

Rendering of the VentCore open source ventilator system [Source: VentCore]

Rendering of the VentCore open source ventilator system [Source: VentCore]

Rendering of the VentCore open source ventilator system [Source: VentCore]

A company has produced an open source design for a rudimentary ventilator system, with many 3D printable components. 

Iā€™m a bit reluctant to publish on this project, as this is most certainly not an approved device. However, on the chance that it may help someone, somewhere, in a desperate situation I will do so. 

There is a worldwide shortage of ventilators. These are medical devices that assist someone unable to breathe, and this is a situation that is happening much more frequently due to the COVID-19 pandemic. In some extreme cases, medical authorities run short and must make difficult decisions on which patients will use a ventilator, and which patients will not. 

A proper ventilator is a rather complex device that must very carefully integrate with a patientā€™s breathing system. If it is not properly tuned it can actually cause more damage than not. Some ā€œinstantā€ ventilator designs floating around are definitely not helpful, but it seems that the VentCore design attempts to offer the minimum functionality. 

The VentCore Project


Internals of the VentCore open source ventilator system [Source: VentCore]

Internals of the VentCore open source ventilator system [Source: VentCore]

The VentCore project was launched by Kosovo-based Formon, a manufacturer of a rather unusual desktop 3D printer that weā€™ll have to take a closer look at another day.

The project attempts to automate the common ā€œbag valve maskā€ system. This is essentially a bag that a nurse can manually squeeze to push air through a valve into the patientā€™s lungs. It works well, but ties up the nurse, preventing them from performing other important duties.

The VentCore device attempts to automate the squeezing of the bag. But itā€™s not just squeezing a bag, because every breath is different, and especially between people and their progress through a respiratory disease. Thus the VentCore device includes an ability to control the breathing frequency, duration of breath and volume of air moved. In theory a medical professional could adjust these settings to achieve the optimum respiratory configuration for a given patient. This is quite unlike some other designs that simply repeatedly squeeze the bag in an identical way for each breath. 

This is NOT a certified medical device and obviously should be used only in the most desperate situations. Unfortunately, there are such situations occurring around the world today. 


3D printed and other parts for the VentCore open source ventilator system [Source: VentCore]

3D printed and other parts for the VentCore open source ventilator system [Source: VentCore]

Formon has published the entire system design online, including circuit board designs. This is thus not something you could 3D print in a weekend, but requires several other making technologies. Nevertheless, it should be producible in many locations with commonly available equipment. 

Formon says: 

ā€œIt is designed as an open system that can be easily produced and replicated fast, at the same time inviting everyone to contribute in its improvement as a device.

Lets not let the lack of ventilators be the reason for more deaths from this unfortunate situation we as humanity found ourselves in.ā€

The Disclaimer


Assembling the VentCore open source ventilator system [Source: VentCore]

Assembling the VentCore open source ventilator system [Source: VentCore]

As you might imagine, there is a significant ā€œTerms of Useā€ document associated with the design, which you must agree to before using it. 

There are considerable Warranty and Liability sections within the terms document, and most of it is written in uppercase to indicate its importance. Basically, the document says that the designers are not liable for your use of the design, and that a user is entirely responsible for using the VentCore system. For example: 

ā€œYOU UNDERSTAND AND ACKNOWLEDGE THAT: YOU ARE A LEARNED INDIVIDUAL THAT HAS HAD THE OPPORTUNITY TO OBTAIN ANY AND ALL INFORMATION RELEVANT TO THE USE OF ANY DEVICE RESULTING FROM YOUR USE OF THE CONTENT, INCLUDING THE DESIGN SPECIFICATIONS; YOU HAVE NO OBLIGATION TO USE THE CONTENT, THE DESIGN SPECIFICATIONS OR ANY DEVICE RESULTING THEREFROM AND YOU DO SO IN YOUR SOLE DISCRETION; YOU ARE RESPONSIBLE FOR DETERMINING THE DEGREE OF MONITORING OR OVERSIGHT THAT IS APPROPRIATE IN CONNECTION WITH PATIENT CARE AND THE USE OF ANY DEVICE RESULTING FROM YOUR USE OF THE CONTENT, INCLUDING THE DESIGN SPECIFICATIONS; YOU HAVE ACCEPTED ALL RESPONSIBILITY AND FORMON LLC RETAINS NO RESPONSIBILITY FOR YOUR USE OF ANY RESULTING DEVICE; AND YOU WILL COMPLY WITH ALL LAWS AND GOVERNMENTAL RULES, REGULATIONS AND GUIDELINES, INCLUDING ANY SAFETY PRECAUTIONS, THAT ARE APPLICABLE TO THE DEVICE OR THE USE THEREOF.ā€

In other words, youā€™d better know what youā€™re doing if you choose to make this device. 

Via VentCore

By Kerry Stevenson

Kerry Stevenson, aka "General Fabb" has written over 8,000 stories on 3D printing at Fabbaloo since he launched the venture in 2007, with an intention to promote and grow the incredible technology of 3D printing across the world. So far, it seems to be working!

Leave a comment